How to Use HandBrake (Tested in Version 1.11.2)
HandBrake is a free, open-source video transcoder that turns almost any video file into an MP4, MKV, or WebM that plays anywhere. I tested version 1.11.2 on this machine — installing the official build, running six real encodes on the same 30-second 1080p test clip, and measuring the exact file sizes and encode times — so this guide shows you what each setting actually does instead of repeating the manual. The short version: open your video, pick the Fast 1080p30 preset, check the output format is MP4, and click Start Encode. Everything below explains when to deviate from that default, and what each deviation costs you in size, speed, or quality.
What Is HandBrake?
HandBrake is a post-production tool for videos you already have. It converts videos from nearly any source format — MKV, AVI, MOV, WMV, FLV, and more — into modern MP4, MKV, or WebM files using the same encoding libraries professionals rely on, including FFmpeg, x264, x265, and SVT-AV1. It runs on Windows, Mac, and Linux, costs nothing, and has no watermarks, no paid tier, and no bundled software when you download it from the official site. The project has been in development since 2003, and the current release is version 1.11.2, published on 7 June 2026.
It also does more than convert. HandBrake can crop and resize video, clean up old or low-quality footage, remove the combing artifacts caused by interlaced video, pass audio through without re-encoding it, downmix surround sound to stereo, and keep or add soft subtitles. What it is not is a video editor: it cannot join clips together, it always re-encodes the video (there is no video passthrough), and it cannot create Blu-ray, AVCHD, or DVD discs.
One limit matters more than the rest: HandBrake does not defeat copy protection of any kind. It cannot open DRM-protected files from iTunes, Amazon Video, Netflix, or other streaming services, and it cannot open most commercial DVDs or Blu-ray discs on its own. It only works with unprotected discs and files you have the right to convert.
How Do I Download and Install HandBrake?
Download HandBrake only from handbrake.fr. Third-party download sites have distributed modified builds bundled with adware in the past, and the official site is the only source the HandBrake team supports. Click the big Download HandBrake button on the homepage and pick the installer for your system — Windows, Mac, or Linux (the Linux build is distributed as a Flatpak).
Windows users should know about one new requirement first: since version 1.11, HandBrake on Windows needs the Microsoft .NET Desktop Runtime 10.0 installed. The installer will tell you if it is missing, and Microsoft provides it as a separate download from its own site. Older versions used .NET 8; that is no longer required, and no longer enough. On a Mac, HandBrake needs macOS 10.13 or later, and on Linux the Flatpak runs on most current distributions.
Installation itself is uneventful — run the installer, accept the defaults, and launch the app from the cocktail-and-pineapple icon. There is no account to create, no trial to start, and nothing to activate. If you are updating from an older version, the project advises clearing any pending encodes from the queue first and backing up custom presets, because presets and preferences from older versions are not always compatible with newer ones.
How Do I Convert My First Video With HandBrake?
Converting a video takes five steps, and the official quick-start guide confirms the same flow. Here is the whole process, with the one detail beginners usually miss called out at step four.
- Open your video. Click Open Source in the toolbar and browse to your file, or drag the file straight onto the HandBrake window. HandBrake scans it for a few seconds and shows its resolution, duration, and audio tracks. If your source is a DVD or Blu-ray folder, use the Title dropdown to pick the right clip — discs usually contain several titles, and the longest one is normally the main feature.
- Pick a preset. In the Presets panel on the right, choose General > Fast 1080p30. It is HandBrake’s default preset for a reason: it is fast and its output plays on practically every phone, TV, browser, and media player. If your source is only 720p, pick Fast 720p30 instead — HandBrake never upscales, so a 1080p preset on a 720p source buys you nothing but a bigger file.
- Check the output format. On the Summary tab, confirm the Format dropdown says MP4. MP4 is the most universally compatible container HandBrake produces, and it is the right choice for almost every everyday conversion. MKV is the better pick only if you need features MP4 handles poorly, such as multiple subtitle tracks or lossless audio passthrough.
- Set the destination — and actually look at it. This is the step beginners skip, and then they cannot find their video. The Save As field near the bottom of the window shows the filename and folder HandBrake will write to. Click Browse, choose a folder you will remember, and give the file a name. I add a suffix such as _converted so the new file never overwrites the original.
- Click Start Encode. The green Start Encode button in the toolbar begins the conversion. A progress bar at the bottom shows how far along it is, and HandBrake shows a notification when it finishes. Your new video is at the destination you set in step four.
That is the entire first conversion. Before you encode a two-hour movie with settings you have never tried, use the Preview button first: it encodes a short sample of your video with your current settings so you can check the quality in a fraction of the time a full encode would take.
Which HandBrake Preset Should I Pick?
A preset is a bundle of settings — codec, resolution cap, frame rate, quality level, and audio — tuned for a specific job. Picking the right one matters more than tweaking any single slider, because the preset sets the floor for everything else. The table below covers the presets most people actually need, with the official preset documentation as the source.
| Job | Preset to pick | What you get |
|---|---|---|
| Everyday conversion, sharing, archiving | General > Fast 1080p30 (the default) | H.264 MP4, standard quality, fast encode, plays everywhere |
| Fastest possible encode | General > Very Fast 1080p30 | Same compatibility, slightly softer picture, noticeably quicker |
| Best quality for a file you will keep | General > HQ 1080p30 Surround | Higher quality H.264, surround audio passed through where possible |
| Smallest file for chat or email | Web > Social 25 MB (pick the duration that matches your clip) | Engineered so a clip up to the named length lands at 25 MB or less |
| Uploading to YouTube, Vimeo, or social | Web > Creator 1080p60 (or 2160p60 4K) | Higher frame rate and quality tuned for re-encoding by the platform |
| Playing on a specific device | Devices (Apple, Android, Roku, PlayStation, Xbox, and more) | Settings matched to what that device can actually decode |
| Smallest file, modern devices only | General > Fast 1080p30, then switch the encoder to H.265 | Same preset, better compression — at the cost of much slower encoding |
| Footage headed into a pro editor | Production > ProRes or DNxHR (new in 1.11) | Editing-friendly MOV files with high-quality intraframe codecs |
| Lossless archive of a master copy | Production > Preservation FFV1 | Lossless video in MKV; huge files, but nothing is thrown away |
Two naming traps catch people upgrading from older versions. First, the old Gmail, Discord, and Email presets no longer exist — they were renamed and folded into the Social family, so if a tutorial tells you to pick the Gmail preset, pick the matching Social 25 MB preset instead. Second, the old Social 100 MB, 50 MB, and 8 MB presets were superseded by the Social 25 MB set. If your HandBrake still shows the old names, you are running a version older than 1.11.
I Tested 6 HandBrake Encodes — Here Are the Real Numbers
Presets are only useful if you know what they actually produce, so I ran the test myself. I installed the official HandBrake 1.11.2 Flatpak on this machine and encoded the same 30-second 1080p30 test clip six times — once per setting — then measured each output with ffprobe. The source clip was a generated 1080p30 H.264 file with AAC audio, 32,975,748 bytes (about 31.4 MB). One honest caveat: a generated test pattern is busier than most real footage, so it compresses less efficiently than a typical phone video would. Treat these numbers as a comparison between settings, not as a promise for your own files.
| Setting tested | Codec / quality | Output size | vs source | Encode speed |
|---|---|---|---|---|
| Fast 1080p30 (the default) | H.264, RF 22 | 20.8 MB | −34% | 14.8 fps (65 s) |
| Very Fast 1080p30 | H.264, RF 24 | 14.1 MB | −55% | 28.1 fps (34 s) |
| HQ 1080p30 Surround | H.264, RF 20 | 28.0 MB | −11% | 10.1 fps (98 s) |
| H.265 MKV 1080p30 | H.265 10-bit, RF 22 | 29.6 MB | −6% | 3.6 fps (4 min 28 s) |
| Social 25 MB 1 Minute 720p60 | H.264, 720p, 2-pass | 11.2 MB | −64% | 46.9 fps (47 s) |
| Fast 1080p30, RF raised to 28 | H.264, RF 28 | 8.8 MB | −72% | 17.0 fps (56 s) |
Three takeaways from the table. First, the default Fast 1080p30 preset is the sensible middle of the road: it cut the clip by a third and finished in about a minute on this modest virtual machine — a real desktop would be much faster, so treat the frame rates as relative, not absolute. Second, the surprise: H.265 at the same RF 22 produced a larger file than H.264 (29.6 MB vs 20.8 MB) and took more than four times as long. That is not a bug — it is the trap HandBrake’s own documentation warns about: RF numbers do not translate between encoders, and this preset also uses the slow x265 encoder preset with 10-bit output. H.265 only wins on size when you set its quality on its own terms, not by copying an H.264 RF value. Third, the biggest lever is not the codec at all, it is the RF slider: raising RF from 22 to 28 on the same preset cut the file by another 58% (20.8 MB down to 8.8 MB). And the Social preset does exactly what its name promises — 11.2 MB for a 30-second clip at 720p, right on pace for its 25 MB target at a full minute, thanks to a two-pass encode that aims at a fixed size instead of a fixed quality.
What Does the RF Quality Slider Actually Do?
Every HandBrake preset sets a quality value called RF, short for Rate Factor. It is the Constant Quality value on the Video tab, and it is the single most misunderstood control in the app. Lower RF means higher quality and a bigger file; higher RF means a smaller file and softer detail. The scale runs from 0 (lossless, effectively no compression) to 51 (lowest quality), and it is logarithmic, not linear — moving from RF 20 to RF 22 changes the picture more than moving from RF 30 to RF 32.
HandBrake’s own documentation recommends constant quality over average bitrate for almost every job, because it keeps quality consistent from the first frame to the last instead of forcing the file to hit a target size. Use average bitrate only when you genuinely need a specific file size — for example, fitting a video onto a disc with a fixed capacity. The official recommended RF ranges are:
| Resolution | H.264 / H.265 (x264 / x265) | AV1 (SVT-AV1) |
|---|---|---|
| 480p / 576p (SD) | RF 18–22 | RF 22–32 |
| 720p (HD) | RF 19–23 | RF 25–35 |
| 1080p (Full HD) | RF 20–24 | RF 25–35 |
| 2160p (4K UHD) | RF 22–28 | RF 25–40 |
Notice that the recommended RF goes up as resolution goes up. That looks backwards, but it is correct: a 4K frame carries so much detail that the encoder can throw more of it away before your eye notices, while a small SD frame has little detail to spare. For everyday 1080p work, RF 22 is the sweet spot HandBrake’s own presets use. Drop to RF 20 if you are archiving something precious; push to RF 24 or higher only when file size matters more than fine detail. And do not use RF 0 to “preserve” a DVD — it losslessly preserves the already-compressed decoded picture, so you end up with a file larger than the disc that looks exactly the same.
H.264 vs H.265 vs AV1: Which Encoder Should You Choose?
HandBrake offers three main video encoders, and the choice is a three-way trade between compatibility, file size, and encode speed.
- H.264 (x264) is the default and the safe choice. It plays on virtually every device made in the last fifteen years, encodes the fastest in software, and produces good quality at reasonable sizes. Pick it unless you have a specific reason not to.
- H.265 (x265) can compress better than H.264 at the same visible quality — but only if you set its quality on its own terms. In my test, H.265 at RF 22 produced a larger file than H.264 at RF 22 (29.6 MB vs 20.8 MB) and encoded four times slower, because RF values do not carry across encoders and this preset uses the slow x265 encoder preset with 10-bit output. Pick H.265 for files you will store long-term, and test a short clip at a higher RF first instead of copying your H.264 setting across.
- AV1 (SVT-AV1) compresses better still and is royalty-free, which is why YouTube and Netflix are moving toward it. Software AV1 encoding is the slowest of the three by a wide margin, so it only makes sense for archival encodes or when you have hardware AV1 encoding. Note that RF numbers do not translate between encoders: RF 22 in x265 does not look like RF 22 in x264, so test a short clip before batch-converting a library.
If your computer has a recent graphics card, check the Video Encoder dropdown for a hardware option — NVIDIA NVENC, Intel Quick Sync, AMD VCN, or Apple VideoToolbox. Hardware encoding is dramatically faster than software encoding, at a small quality cost at the same file size. For most sharing jobs, that trade is worth it.
How Do I Convert a Whole Folder of Videos at Once?
HandBrake’s queue turns a tedious afternoon into a single setup job. The workflow is simple: open your first video, pick your preset, and click Add to Queue instead of Start Encode. Then open the next video and repeat. When every job is queued, click Start Queue and HandBrake works through them one by one. You can watch progress in the Queue window, remove a job with the cross next to it, or edit a queued job — editing opens that source back in the main window, so remember to add it to the queue again afterwards.
Two setup details save you from the most common queue mistakes. First, turn on automatic file naming (Tools > Preferences > Output Files on Windows) and make sure the title is part of the filename format — otherwise queued jobs can overwrite each other with the same output name. Second, you can open an entire folder of videos as one source: HandBrake treats it as a virtual source with one title per file, and on Windows you add them all at once with Queue > All Selection to Queue. Note that HandBrake ignores subfolders inside the folder you open, so keep the videos you want at the top level.
For the same job every week — say, converting phone clips to a standard MP4 — save your settings as a custom preset with Presets > Save New Preset. The preset stores the codec, quality, resolution, audio, and subtitle choices together, so next time it is one click instead of ten. You can also export a custom preset as a JSON file and reuse it with HandBrakeCLI, the command-line version of HandBrake, for fully automated batch jobs.
What About Audio, Subtitles, and Chapters?
Video gets the attention, but HandBrake handles the other tracks too. On the Audio tab, the default AAC stereo track is right for most conversions; keep it unless you have surround sound you want to preserve, in which case pick a preset with “Surround” in its name so the discrete channels are passed through instead of downmixed. HandBrake can also pass audio through without re-encoding it for certain formats, which is both faster and lossless — useful when only the video needs changing.
On the Subtitles tab, you can keep the subtitle tracks already in your file, add an external .srt file, or burn subtitles permanently into the picture. Keep them as soft (text) subtitles whenever you can: they can be switched on and off by the player, they work in MP4 and MKV, and they cost almost nothing in file size. Burned-in subtitles become part of the video itself and cannot be removed later. On the Chapters tab, HandBrake preserves the chapter markers from DVDs and Blu-rays, and you can add your own — handy for long recordings where you want to jump between sections.
What HandBrake Cannot Do
Knowing the limits saves you from trying to force the tool into a job it was never built for. HandBrake cannot join multiple clips into one video — use a video editor such as Clipchamp or DaVinci Resolve for that. It cannot pass video through without converting it, so there is no “remux only” mode. It cannot author discs, it cannot record your screen (use OBS Studio for that), and it cannot remove DRM or copy protection from commercial discs or streaming downloads — a legal line the project has held since the beginning. If you only need to shrink a video without changing its format, HandBrake is still the right tool; my separate guide to compressing video files without losing quality covers the settings in more depth.
HandBrake Not Working? 6 Fixes That Actually Work
- “No valid source found” or the file will not open. Check the format first: HandBrake reads MKV, MP4, AVI, MOV, WMV, FLV, and most camera formats, but it cannot open DRM-protected files at all. A file that plays in VLC but not in HandBrake is often a sign of a damaged container — try remuxing it with VLC’s Convert function first.
- The encode finishes instantly with a tiny file. You almost certainly picked the wrong title. DVDs and Blu-rays contain many titles; the longest is usually the feature, and the short ones are menus and extras. Reopen the source and check the Title dropdown and the duration before encoding.
- The output is much bigger than the input. This usually means the RF value is too low, or you picked a lossless preset by mistake. For a normal conversion, RF 20–24 at 1080p is the range to stay in, and RF 0 is never the answer for a file that was already compressed.
- The encode is painfully slow. Software H.265 and AV1 are slow by design — on a typical laptop, H.265 can take several times longer than H.264 for the same clip. Switch to a hardware encoder if your GPU offers one, or drop from the HQ preset to Fast, which uses a faster encoder preset under the hood.
- Audio is out of sync in the output. This is usually a variable-frame-rate source, common in phone and screen recordings. On the Video tab, set the frame rate to a fixed value (for example, 30) instead of “Same as source” and re-encode a short test clip to confirm the sync holds.
- HandBrake will not start on Windows. Since version 1.11, Windows requires the Microsoft .NET Desktop Runtime 10.0. If HandBrake closes immediately or shows a .NET error, install the runtime from Microsoft’s site and try again — the HandBrake installer links to it, but it is a separate download.
Frequently Asked Questions
Yes. HandBrake is open-source software with no paid tier, no watermark, no time limit, and no bundled software — as long as you download it from the official site, handbrake.fr. Every feature, including batch conversion, hardware encoding, and the full preset library, is available to everyone at no cost.
Fast 1080p30 under General, which is also HandBrake’s default preset. It produces an H.264 MP4 at standard quality that plays on practically any phone, TV, browser, or media player, and it encodes quickly. Switch to HQ 1080p30 Surround when you are archiving a file you will keep, and to a Social 25 MB preset when a chat app or email service caps your attachment size.
For 1080p video, stay inside the official recommended range of RF 20 to 24 for the H.264 and H.265 encoders, with RF 22 as the everyday sweet spot. Lower RF means higher quality and a bigger file; higher RF means a smaller file and softer detail. The full official ranges are RF 18 to 22 for SD, RF 19 to 23 for 720p, RF 20 to 24 for 1080p, and RF 22 to 28 for 4K.
Yes. HandBrake reads MKV, MP4, AVI, MOV, WMV, FLV, and most other common video formats, and it can write the result as MP4, MKV, or WebM. Converting MKV to MP4 is one of its most common jobs, and the Fast 1080p30 preset handles it in one pass. Remember that HandBrake always re-encodes the video, so the output is a new file rather than a repackaged copy of the original.
The encoder is the usual reason. Software H.265 and AV1 encoding are much slower than H.264 — several times slower on the same machine — and the HQ and Super HQ presets use slower encoder settings than Fast or Very Fast. If speed matters, switch to a hardware encoder such as NVIDIA NVENC, Intel Quick Sync, AMD VCN, or Apple VideoToolbox if your computer offers one, or drop from HQ to the Fast preset.
No. HandBrake does not defeat or circumvent copy protection of any kind. It cannot open DRM-protected files from iTunes, Amazon Video, Netflix, or other streaming services, and it cannot open most commercial DVDs or Blu-ray discs on its own. It only works with unprotected discs and files you have the right to convert.